--- Beam Detectors
Open-Area Smoke Image Detection (OSID)
Open-area Smoke Imaging Detection (OSID) is an innovative system for reliable, cost-effective smoke detection for large, open spaces requiring standard sensitivity detection. In its simplest configuration, OSID uses one imager, a camera-like device with a wide field of view, and a wired or battery-powered emitter roughly aligned on the opposite wall within the protected area. The emitter sends both infrared and ultraviolet coded light signals to the imager.
FireRay 5000 Infrared Optical Beam Smoke Detector
FireRay 5000 is the first of a new family of auto aligning infrared optical beam smoke detector products and accessories. This innovative system has been designed from the ground up to include pioneering technology that fully addresses the needs of the installer and user, both now and in the future.
FireRay 3000 Infrared Optical Beam Smoke Detector
The FireRay® 3000 End to End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties.
BDM800 Loop Powered Beam Detector Module
The BDM800 Beam Detector Module is designed to interface the MZX FireRay3000/5000 Beam Detectors to the MZX Digital Addressable Loop. The BDM800 provides power from the loop, monitors the Fire and Fault Relay Contacts of the detector and also monitors the wiring to the detector for open and short circuit faults.
BTM800 Beam Termination Module
In many cases it will be necessary to site the BDM800 Beam Detector Module some distance from the beam detector itself. To minimise and simplify wiring in such cases an optional unit, the BTM800 Beam Termination Module is available. he BTM800 is housed in a standard double gang ancillary cover and has all the connections and components required to minimise installation time.
--- Addressable and Conventional Flame Detectors
FLAMEVision Array Based Infrared Flame Detectors
FLAMEVision FV300 uses Infra-Red Array based sensing technology to provide the ultimate programmable flame detector. An array of 256 infra-red sensors plus two optical channels view the protected area. Powerful algorithms running on a Digital Signal Processor (DSP) are tuned to the characteristics of a fire and analyse the signals from these 3 channels to quickly and reliably identify fires.
FLAMEVision FV400 Triple IR Flame Detectors
The FV400 FLAMEVision detectors use Triple IR Solar Blind sensing technology and flame detection algorithms to provide high performance sensing capabilities for hydrocarbon fires. This includes the ability to reliably sense flames through high densities of solvent vapours and black smoke, increasing the probability of early detection with consistent high sensitivity to flame throughout the whole field of view.

601FEx I.S. Flame Detector
The 601FEx is a full featured solar blind flame detector for indoor use and boasts a high degree of false alarm immunity.

801FEx I.S. Flame Detector
The 801FEx point type flame detector is part of the MZX Technology® range of digital addressable fire detectors.

Flame Detector Test Equipment
There is a wide range of equipment available for testing flame detectors. This range includes test source for use with the Solo range of detector poles, adapters, batteries, chargers and carry cases.