850PH and 830PH Gen-6 Photo Heat Detectors
With the ability to detect a wide range of fires from flaming to smouldering types, the combined optical and heat multi-sensor detector is the preferred choice for a range of applications including light industrial, retail and office environments. It operates in a number of approved modes and sensitivities that can be dynamically selected to suit different environmental conditions.

850P and 830P Gen-6 Photo Detectors
More benign environments where any potential fire will be slow burning can be protected using the optical detector. A choice of sensitivities and modes gives this detector a broad range of applications.

850H and 830H Gen-6 Heat Detectors
To compliment the range the heat sensor can operate in fixed temperature and rate-of-rise modes with a number of approved sensitivities. Most often used in areas where high levels of dust are present or where the environment precludes the use of smoke detectors.

850PC and 830PC Gen-6 3oTec Triple Sensor Detectors
For life protection and when the environmental conditions are challenging, the 3oTec detector provides the ultimate in detector performance and false alarm rejection. It is a multi sensor that monitors smoke, heat and CO levels in concert to accurately determine the presence of fire. Applications include industrial, retail, transport hubs, and healthcare. Its false alarm rejection properties make it the ideal choice for hotel bedrooms where steam from bathrooms is a common source of false alarms

801F Flame Detectors
The 801F point type flame detector is part of the MZX Technology® range of digital addressable fire detectors.The 801F is a full featured solar blind flame detector for indoor use and boasts a high degree of false alarm immunity.The 801F is designed for direct connection to the MZX digital loop, employing the same detector base or functional base as other 800 series fire detectors.

850EMT Engineering Management Tool
The 850EMT is a commissioning tool that communicates with 850 and 830 series fire devices via a two way infrared link. It is designed to speed up and simplify installation and commissioning, reduce the possibility of engineering error and improve health and safety by removing the need for working at height.

4B 4 Inch Detector Base
This base is for use with 830 Series detectors when short circuit isolation is not required.

4B-C 4 Inch Continuity Base
This base is for use with 850 Series detectors.The 4B-C base provides continuity when the detector is removed.

4B-I 4 Inch Isolator Base
This base is for use with 830 Series detectors to provide local short circuit isolation.

Addressable Sounder VAD Bases
The P80AVB and P81AVB are addressable sounder bases with a Visual Alarm Device (VAD) specifically for use with the ZETTLER addressable detectors. The bases are available as fire alarm sounders with Visual Alarm Device in two power outputs, standard and high. The high power option provides more coverage for the VAD compared to standard. Each has an address so they can be monitored and controlled from the fire alarm control panel, which is independent of the detector fitted to the base. The power and communications for the sounder, VAD and detector are provided by the two-wire digital loop. This helps to reduce installation costs as no additional wiring is required.

Addressable Sounder Base and Addressable Sounder VID Base
The P80SB is an addressable sounder base specifically for use with the ZETTLER addressable detectors. The base incorporates a fire alarm sounder that carries its own address so it can be monitored and controlled from the fire alarm control panel, which is independent of the detector fitted to the base. Both power and communications for the sounder and detector are provided by the two-wire digital loop. This helps to reduce installation costs as no additional wiring is required. Additionally, the P80AIB houses an addressable LED beacon to provide a visual indicator otherwise known as a VID.

Detector Activated Sounder Base
The 80DSB is a detector base specifically for use with the ZETTLER addressable detectors. The base incorporates a fire alarm sounder that is activated directly by the detector.

801RB Functional Relay Base
The 801RB provides dual relay contacts for signalling external devices on MZX addressable systems. A very low operating current even when the relay is energised enables the relay base to be used without any additional power.The dual contacts are under the control of a programmable output, through the powerful cause and effect software.

Remote Detector Indicators
A range of remote detector indicators including the 801RIL and 800HL units.

Duct Probe Units
A range of duct probe units for use with standard detectors and bases.

Generation 6 Detector Base Ancillaries
A range of detector base accessories has been designed for use with the Generation 6 detector base range to cut installation time, enhance the installed appearance and mechanically protect the installation.

Detector Testing and Commissioning Equipment Equipment available includes telescopic extension poles, cordless heat detector tester kits, pole sets for ZETTLER detector changers and testers, smoke detector aerosol tester, CO detector field test kit.